Label Alignment For Line/Ext Key Display; Label Alignment Display Configuration - Yealink SIP-T5 Series Administrator's Manual

2-Mid-Range (only applicable to T54W/T46U/T46S/T46G/T29G phones)
Default 0
Supported
All color screen phones
Devices
Web UI Dsskey > Line Key > Label Length
Parameter features.shorten_linekey_label.enable
It enables or disables the phone to display the length of the line key label with 9 digits.
Description
Note: It works only if "features.config_dsskey_length" is set to 0 (Default).
0-Disabled, the line key label can display at most 8 digits.
Permitted
Values
1-Enabled, the line key label can display at least 9 digits.
Default 0
Supported
T54W, T46U, T46S, T46G, T29G
Devices

Label Alignment for Line/Ext Key Display

You can customize the line/Ext key label alignment.
This feature is only applicable to T54W/T46U/T46S/T46G/T29G phones and expansion module EXP50 (connected
to the T57W/T54W/T53W/T53 phones)/EXP43 (connected to the T48U/T46U/T43U phones).
The following figures show the line key label alignment on T46S/G phones:
Topic

Label Alignment Display Configuration

Label Alignment Display Configuration
The following table lists the parameter you can use to configure the label alignment display.
Parameter phone_setting.dsskey_label.display_method
It configures the alignment mode of the line key/Ext key label.
Description
Note: If some Ext keys already exist before configuration, you need to refresh the page (press the
page keys, or try re-connecting the expansion module) to make the change take effect.
0-the label and icon align left
Permitted
1-when the line key/Ext key is on the left side of the screen, the label and icon align left; when the line
Values
key/Ext key is on the right side of the screen, the label and icon align right
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
211