Dial Now Configuration - Yealink SIP-T5 Series Administrator's Manual

0 to 2 (for T21(P) E2)
0, 1 (for CP920)
Default Blank
Supported
All phones except T19(P) E2
Devices
Web UI Settings > Dial Plan > Replace Rule > Account
Parameter dialplan_replace_rule.url
It configures the access URL of the replace rule template file.
For customizing replace rule template file, refer to
Description
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
URL within 511 characters
Values
Default Blank
[1]
X is from 1 to 100.

Dial Now Configuration

You can configure dial now rules either one by one or in batch using a dial now template.
The following table lists the parameters you can use to configure the dial now.
Parameter dialplan.dialnow.rule.X
It configures the dial now rule (the string used to match the numbers entered by the user).
When entered numbers match the predefined dial now rule, the phone will automatically dial out the
numbers without pressing the send key.
Example:
Description
dialplan.dialnow.rule.1 = 123
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
String within 511 characters
Values
Default Blank
Web UI Settings > Dial Plan > Dial Now > Rule
Parameter dialplan.dialnow.line_id.X
It configures the desired line to apply the dial now rule.
The digit 0 stands for all lines. If it is left blank, the dial-now rule will apply to all lines on the phone.
Description
Note: Multiple line IDs are separated by commas. It works only if "dialplan.digitmap.enable" and
"account.X.dialplan.digitmap.enable" are set to 0 (Disabled).
0 to 16 (for T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G)
0 to 12 (for T53W/T53/T43U/T42U/T42S/T42G)
Permitted
Values
0 to 6 (for T41P/T41S/T27G)
0 to 3 (for T40P/T40G/T23P/T23G)
[1]
[1]
<y0000000000xx>.cfg
Replace Rule File Customization.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
354