Session Timer Configuration; Reboot In Talking - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Supported: timer
Content-Length: 0
Topic

Session Timer Configuration

Session Timer Configuration
The following table lists the parameters you can use to configure the session timer.
Parameter account.X.session_timer.enable
Description It enables or disables the session timer.
0-Disabled
Permitted
Values
1-Enabled, the phone will send periodic UPDATE requests to refresh the session during a call.
Default 0
Web UI Account > Advanced > Session Timer
Parameter account.X.session_timer.expires
It configures the interval (in seconds) for refreshing the SIP session during a call.
An UPDATE will be sent after 50% of its value has elapsed. For example, if it is set to 1800 (1800s),
Description
the phone will refresh the session during a call every 900 seconds.
Note: It works only if "account.X.session_timer.enable" is set to 1 (Enabled).
Permitted
Integer from 90 to 7200
Values
Default
1800
Web UI Account > Advanced > Session Expires (90~7200s)
Parameter account.X.session_timer.refresher
It configures who refreshes the SIP session during a call.
Description
Note: It works only if "account.X.session_timer.enable" is set to 1 (Enabled).
0-UAC
Permitted
Values
1-UAS
Default 0
Web UI Account > Advanced > Session Refresher
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.

Reboot in Talking

Reboot in talking feature allows the phones to reboot during an active call when it receives a reboot Notify mes-
sage.
Topic
Reboot in Talking Configuration
497
[1]
<MAC>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg