Area Code Configuration - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
0 to 2 (for T21(P) E2)
0, 1 (for CP920)
Default Blank
Supported
All phones except T19(P) E2
Devices
Web UI
Settings > Dial Plan > Dial Now > Account
Parameter phone_setting.dialnow_delay
It configures the delay time (in seconds) for the dial now rule.
When entered numbers match the predefined dial now rule, the phone will automatically dial out the
entered number after the designated delay time.
Description
If it is set to 0, the phone will automatically dial out the entered number immediately.
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
Integer from 0 to 14
Values
Default 1
Web UI Features > General Information > Time Out for Dial Now Rule
Parameter dialplan_dialnow.url
It configures the access URL of the dial now template file.
For customizing dial now template file, refer to
Description
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
String within 511 characters
Values
Default
Blank
Parameter dialplan.transfer.mode
It configures the transfer type the phone will perform when the entered transferee numbers match the
Description
Dial Now rule of the dial plan or the predefined string of the digit map.
0-Semi-attended Transfer/Attended Transfer
Permitted
Values
1-Blind Transfer
Default 0
dialplan.dialnow.rule.X
Related
dialplan.digitmap.string
Parameters
account.X.dialplan.digitmap.string
[1]
X is from 1 to 100.

Area Code Configuration

The following table lists the parameters you can use to configure the area code.
Parameter dialplan.area_code.code
Description It configures the area code to be added before the entered numbers when dialing out.
355
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Dial Now File Customization.
<y0000000000xx>.cfg
<y0000000000xx>.cfg