Password Dial; Password Dial Configuration; Call Timeout - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

Password Dial

Password dial feature allows the callee number to be partly displayed on the IP phone when placing a call. The hid-
den digits are displayed as asterisks on the phone screen. The number in the placed call list is also partly displayed
on the IP phone. This feature is especially useful for users who often place important and confidential calls.
Topic

Password Dial Configuration

Password Dial Configuration
The following table lists the parameters you can use to configure password dial.
Parameter features.password_dial.enable
Description It enables or disables the phone to partly display the callee number when placing a call.
Permitted
0-Disabled
Values 1-Enabled
Default 0
Web UI
Features > General Information > PswDial
Parameter features.password_dial.prefix
It configures the prefix that the number starts with this prefix will be partially displayed.
Example:
Description
features.password_dial.prefix = 12
Note: It works only if "features.password_dial.enable" is set to 1 (Enabled).
Permitted
String within 32 characters
Values
Default Blank
Web UI Features > General Information > PswPrefix
Parameter features.password_dial.length
It configures how many digits to be displayed as asterisks.
Example:
features.password_dial.length = 3
Description
If you set the prefix to 12 and the length to 3, when you want to dial the number 123456, the entered
number is displayed as 12***6 on the phone screen.
Note: It works only if "features.password_dial.enable" is set to 1 (Enabled).
Permitted
Integer from 0 to 32
Values
Default Blank
Web UI Features > General Information > PswLength

Call Timeout

Call timeout defines a specific period of time after which the phone will cancel the dialing if the call is not answered.
Topic
375
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg