Setting Up A Provisioning Server; Supported Provisioning Protocols; Provisioning Protocols Configuration - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Parameter

Setting Up a Provisioning Server

You can use a provisioning server to configure your phones. A provisioning server allows for flexibility in upgrading,
maintaining and configuring the phone. Boot files, configuration files, and resource files are normally located on this
server.
Topics

Supported Provisioning Protocols

Supported Provisioning Server Discovery Methods
Configuring a Provisioning Server
Supported Provisioning Protocols
Yealink phones support several transport protocols for provisioning:
Trivial File Transfer Protocol (TFTP)
l
File Transfer Protocol (FTP)
l
Hyper Text Transfer Protocol – Secure (HTTPS)
l
File Transfer Protocol – Secure (FTPS)
l
Note : There are two types of FTP methods—active and passive. The phones are not compatible with active FTP.
You can specify the transport protocol in the provisioning server address, for example, http://xxxxxxx. If not spe-
cified, the TFTP protocol is used.
Topic

Provisioning Protocols Configuration

Provisioning Protocols Configuration
The following table lists the parameters you can use to configure provisioning protocols.
Parameter static.auto_provision.server.type
It configures the protocol the phone uses to connect to the provisioning server.
Description
Note: It works only if the protocol type is not defined in the access URL of the provisioning server con-
figured by the parameter "static.auto_provision.server.url".
1-http
2-https
Permitted
Values
3-ftp
Other values-tftp
Default tftp
Parameter static.auto_provision.user_agent_mac.enable
It enables or disables the phone's MAC address to be included in the User-Agent header of
Description
HTTP/HTTPS request via auto provisioning.
Permitted
0-Disabled
1-Enabled
Values
Default 1
91
Default: Default value
[1]
Description
<y0000000000xx>.cfg
<y0000000000xx>.cfg