Number Matching Settings; Number Matching Settings Configuration - Yealink SIP-T5 Series Administrator's Manual

Default 0
Supported
All color screen phones
Devices
Parameter phone_setting.search_t9.enable
It enables or disables the phone to perform an intelligent search when searching for contacts in the dir-
Description
ectory.
0-Disabled, the phone only displays the search results of a number match.
Permitted
Values
1-Enabled
Default 1
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
[1]
If you change this parameter, the phone will reboot to make the change take effect.

Number Matching Settings

You can configure the pattern to match the contact numbers with the caller's phone number.
Topics

Number Matching Settings Configuration

Example: Matching Contacts with the Caller's Phone Number Using the Regular Expression
Number Matching Settings Configuration
The following table lists the parameters you can use to configure number matching settings.
Parameter phone_setting.reverse_lookup.contact_list.replace.pattern
Description It configures the matching pattern used to identify the replaced string of the contact number.
Permitted
Regular Expression
Values
Default Blank
Related
phone_setting.reverse_lookup.contact_list.replace.with
Parameters
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter phone_setting.reverse_lookup.contact_list.replace.with
Description It configures the string used to replace the certain matched one of the contact number.
Permitted
String within 512 characters
Values
Default Blank
Related
phone_setting.reverse_lookup.contact_list.replace.pattern
Parameters
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
phone_setting.reverse_lookup.incoming_call.re-
Parameter
place.pattern
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Directory
343