Ipv6 Wireless Network Configuration - Yealink SIP-T5 Series Administrator's Manual

Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > IPv4 >
Static IPv4 Client > Sec.DNS
In DHCP environment:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > IPv4 >
DHCP IPv4 Client > Static DNS (Enabled) > Sec.DNS
[1]
If you change this parameter, the phone will reboot to make the change take effect.

IPv6 Wireless Network Configuration

If you configure the network settings on the phone for an IPv6 network, you can set up an IP address for the phone
by using SLAAC (ICMPv6), DHCPv6 or by manually entering an IP address. Ensure that your network environment
supports IPv6. Contact your ISP for more information.
When you enable both SLAAC and DHCPv6 on the phone, the server can specify the IP phone to obtain the IPv6
address and other network settings either from SLAAC or from DHCPv6, if the SLAAC server is not working, the
phone will try to obtain the IPv6 address and other network settings via DHCPv6.
The following table lists the parameters you can use to configure IPv6 wireless network.
Parameter static.network.wifi.ipv6_internet_port.type
It configures the Internet port type for IPv6 wireless network.
Description
Note: It works only if "static.network.wifi.ip_address_mode" is set to 1 (IPv6) or 2 (IPv4 & IPv6).
0-DHCP
Permitted
Values
1-Static IP
Default 0
Supported
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Devices
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Network > Wi-Fi > IPv6 Config > Configuration Type
Web UI
Other Phones:
Network > Wi-Fi > IPv6 Config
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > IPv6
Phone UI
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > IPv6
Parameter static.network.wifi.ipv6_internet_port.ip
It configures the IPv6 address for the wireless network.
Description
Note: It works only if "static.network.wifi.ip_address_mode" is set to 1 (IPv6) or 2 (IPv4 & IPv6), and
"static.network.wifi.ipv6_internet_port.type" is set to 1 (Static IP).
Permitted
IPv6 Address
Values
Default
Blank
Supported
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Devices
Web UI T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
Network Configurations
49