Yealink SIP-T5 Series Administrator's Manual page 317

Default 1
Supported
All phones except T19(P) E2 and CP920
Devices
account.X.phone_setting.call_appearance.transfer_via_new_
Parameter
[1]
linekey
It enables or disables to distribute a transferring call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Description
Note: The number of the line keys is determined by "account.X.number_of_linekey". The value con-
figured by this parameter takes precedence over that configured by the parameter "phone_set-
ting.call_appearance.transfer_via_new_linekey".
Permitted 0-Disabled, the phone will transfer a call on the current line key.
Values 1-Enabled
Default Blank
Supported
All phones except T19(P) E2 and CP920
Devices
Parameter phone_setting.call_appearance.conference_via_new_linekey
It enables or disables to distribute a conference call to a new line key (the new line key is not seized).
If all line keys are seized, the current line key will be used.
Description
Note: The number of the line keys is determined by "account.X.number_of_linekey". The value con-
figured by the parameter "account.X.phone_setting.call_appearance.conference_via_new_linekey"
takes precedence over that configured by this parameter.
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
Permitted
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
Values
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.
Default 1
Supported
All phones except T19(P) E2 and CP920
Devices
account.X.phone_setting.call_appearance.conference_via_new_
Parameter
[1]
linekey
It enables or disables to distribute a conference call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Description
Note: The number of the line keys is determined by "account.X.number_of_linekey". The value con-
figured by this parameter takes precedence over that configured by the parameter "phone_set-
ting.call_appearance.conference_via_new_linekey".
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
Permitted
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
Values
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.
Account Settings
<MAC>.cfg
<y0000000000xx>.cfg
<MAC>.cfg
314