Shared Contact File Elements And Attributes; Customizing Shared Contact File; Satellite Mode - Yealink SIP-T5 Series Administrator's Manual

Shared Contact File Elements and Attributes

The following table lists the elements and attributes you can use to add contacts in the shared contact file. We
recommend that you do not edit these elements and attributes.
Elements Attributes
display_name
office_number
mobile_number
other_number
Contact
line
ring
default_photo
selected_photo
group_id_name

Customizing Shared Contact File

1. Open the shared contact file.
2. To add a contact, add <contact display_name="" office_number="" mobile_number="" other_number="" line="-
1" ring="Auto" default_photo="Default:default_contact_image.png" selected_photo="0" group_id_name="All
Contacts"/ > to the file. Each starts on a new line.
3. Specify the values within double quotes.
For example:
<contact display_name="Lily"office_number="1020" mobile_number="1021" other_number="1112"/ >
<contact display_name="Tom" office_number="2020" mobile_number="2021" other_number="2112"/ >
4. Save the changes and place this file to the provisioning server.

Satellite Mode

Yealink desk phone can be bound with a handset. The handset can share the line and contacts with the phone. The
call can be shifted between the phone and handset.
Important
: Satellite mode is available only when one handset is registered to the phone.
The following is an example of receiving an incoming call:
Using Handsets with T57W/T54W/T53W/T53 Phones
Specify the contact name.
Note: The contact name cannot be blank or duplicated.
Specify the office number.
Specify the mobile number.
Specify the other number.
Do not modify this attribute and value.
Do not modify this attribute and value.
Do not modify this attribute and value.
Do not modify this attribute and value.
Do not modify this attribute and value.
Description
135