Signing In To The Google Contact Server; Lightweight Directory Access Protocol (Ldap); Ldap Attributes - Yealink SIP-T5 Series Administrator's Manual

Directory > Google Contacts > Google Contact Server
Parameter google_contact_server.display_mode
It configures the display mode of the Google contacts.
Description
Note: It works only if "google_contact_server.enable" is set to 1 (Enabled).
0-All downloaded Google contacts will be displayed on the phone.
Permitted
Values
1-Only the Google contacts whose number fields are not empty will be displayed on the phone.
Default 1
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices

Signing in to the Google Contact Server

After you allow the IP phone to connect to the Google Contact Server, you can sign in to the Google Contact Server
via the web user interface, so that the Google contacts will appear in the phone directory.
Procedure
1. On your web user interface, select Directory > Google Contacts.
2. In the Authentication field, click Sign In.
A pop-up window and a code are displayed.
3. Enter the code generated on the web user interface into the pop-up window.
4. Enter your email address and password.
5. Allow contact test to access your Google account.

Lightweight Directory Access Protocol (LDAP)

LDAP is an application protocol for accessing and maintaining information services for the distributed directory over
an IP network. You can configure the phones to interface with a corporate directory server that supports LDAP ver-
sion 2 or 3. The following LDAP servers are supported:
Microsoft Active Directory
l
Sun ONE Directory Server
l
Open LDAP Directory Server
l
Microsoft Active Directory Application Mode (ADAM)
l
For more information on LDAP, refer to
Topics

LDAP Attributes

Securely Storing the LDAP Credentials
LDAP Configuration
LDAP Attributes
The following table lists the most common attributes used to configure the LDAP lookup on the phones.
Abbreviation Name
gn givenName
cn commonName
sn surname
LDAP Directory on Yealink IP Phones
Description
First name
LDAP attribute is made up from given name joined to surname.
Last name or family name
<y0000000000xx>.cfg
.
Directory
327