Expansion Module Page Tips Indicator; Expansion Module Page Tips Configuration; Time And Date - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

Expansion Module Page Tips Indicator

Expansion Module Page Tips Configuration

Expansion Module Page Tips Indicator
The following table lists the status of the page switch key LED displayed on the expansion module:
Models LED Status Icons
EXP50/EXP43 Flashing red
Expansion Module Page Tips Configuration
The following table lists the parameters you can use to configure expansion module page tips.
Parameter expansion_module.page_tip.blf_call_in.enable
It enables or disables the page switch key LED on the EXP50/EXP43 expansion module to indicate
Description
when BLF monitored user receives an incoming call on the non-current pages.
Permitted
0-Disabled
Values 1-Enabled
Default 1
Supported
T57W, T54W, T53W, T53, T48U, T46U, T43U
Devices
Parameter expansion_module.page_tip.blf_call_in.led
It configures the page switch key LED status on the EXP50/EXP43 expansion module when BLF mon-
itored user receives an incoming call on the non-current pages.
This value uses the same macro action string syntax as an Enhanced DSS key.
If it is left blank, the default value takes effect.
Example:
Description
expansion_module.page_tip.blf_call_in.led = $LEDr300o300$
It means an infinite loop for page switch key LED status: glow red for 300ms and then be in the off
state for 300ms.
Note: It works only if "expansion_module.page_tip.blf_call_in.enable" is set to 1 (Enabled).
Permitted
String
Values
Default $LEDr300o300$
Supported
T57W, T54W, T53W, T53, T48U, T46U, T43U
Devices

Time and Date

Yealink phones maintain a local clock. You can choose to get the time and date from SNTP (Simple Network Time
Protocol) time server to have the most accurate time and set DST (Daylight Saving Time) to make better use of day-
light and to conserve energy, or you can set the time and date manually. The time and date can be displayed in sev-
eral formats on the idle screen.
Topics
Time Zone
NTP Settings
214
/ The BLF monitored user receives an incoming call on the non-current pages.
Description
<y0000000000xx>.cfg
<y0000000000xx>.cfg