Auto Provisioning Settings Configuration - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Yealink phones can obtain the provisioning server address during startup. Then the phones first download boot
files and configuration files from the provisioning server and then resolve and update the configurations written in
configuration files. This entire process is called auto provisioning. For more information on auto provisioning, refer
to Yealink SIP IP Phones Auto Provisioning
The phones can be configured to upload log files (log files provide a history of phone events), call log files and con-
tact files to the provisioning server. You can also configure a directory for each of these three files respectively.
Topics

Auto Provisioning Settings Configuration

User-Triggered Provisioning Settings Configuration
Auto Provisioning Settings Configuration
The following table lists the parameters you can use to configure settings for auto provisioning.
Parameter static.auto_provision.attempt_expired_time
It configures the timeout (in seconds) to transfer a file via auto provisioning.
Description
Note: It has a higher priority than the value defined by the parameter "static.network.attempt_expired_
time".
Permitted
Integer from 1 to 300
Values
Default 20
Web UI Settings > Auto Provision > Attempt Expired Time(s)
Parameter static.network.attempt_expired_time
Description It configures the timeout (in seconds) to transfer a file for HTTP/HTTPS connection.
83
Guide.
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg