Tones Configuration - Yealink SIP-T5 Series Administrator's Manual

Condition
Ring Back Ring-back tone
Busy When the callee is busy
Congestion When the network is congested
Call Wait-
Call waiting tone (For more information on call waiting, refer to
ing
Dial Recall When receiving a callback
Info When receiving a special message
Stutter When receiving a voice mail (For more information on voice mail tone, refer to
Message When receiving a text message (For more information on text message, refer to
Auto
When automatically answering a call (For more information on the auto answer, refer to
Answer
Stutter Dial When receiving a text message

Tones Configuration

The following table lists the parameters you can use to configure tones.
Parameter voice.tone.country
Description It configures the country tone for the phones.
Custom, Australia, Austria, Brazil, Belgium, Chile, China, Czech, Czech ETSI, Denmark, Finland,
Permitted
France, Germany, Great Britain, Greece, Hungary, Lithuania, India, Italy, Japan, Mexico, New Zea-
Values
land, Netherlands, Norway, Portugal, Spain, Switzerland, Sweden, Russia, United States
Default Custom
Web UI Settings > Tones > Select Country
Parameter voice.tone.dial
It customizes the dial tone.
tone list = element[,element] [,element]...
Where
element = [!]Freq1[+Freq2][+Freq3][+Freq4] /Duration
Freq: the frequency of the tone (ranges from 200 to 4000 Hz). If it is set to 0 Hz, it means the tone is
not played.
For T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
Description
A tone is comprised of at most two different frequencies.
For other phones:
A tone is comprised of at most four different frequencies.
Duration: the duration (in milliseconds) of the dial tone, ranges from 0 to 30000ms.
You can configure at most eight different tones for one condition, and separate them by commas. (for
example, 250/200,0/1000,200+300/500,200+500+800+1500/1000).
If you want the IP phone to play tones once, add an exclamation mark "!" before tones (for example,
Description
Call Waiting)
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Audio Features
Alert Tone)
Alert Tone)
Auto Answer)
160