Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
Values
1-Enabled
Default
0
Parameter softkey.X.use.held
It enables or disables the custom soft key X to be displayed in the held state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
Values
1-Enabled
Default
0
Parameter softkey.X.use.conferenced
It enables or disables the custom soft key X to be displayed in the conference state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default
0
Parameter softkey.X.use.dialtone
It enables or disables the custom soft key X to be displayed in the dial tone (no numbers entered)
state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default
0
Parameter softkey.X.use.dialing
It enables or disables the custom soft key X to be displayed in the dialing state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default
0
[1]
X is the soft key ID. X=1-10.
Example: Configuring EDK List for a Line Key
The following takes an example to help you understand how to execute the macro action string.
Example
features.enhanced_dss_keys.enable = 1
edk.edklist.1.enable = 1
edk.edklist.1.mname = IVR1
[1]
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
281