Network Configurations; Ipv4 And Ipv6 Wired Network Settings; Wired Network Ip Addressing Mode Configuration - Yealink SIP-T5 Series Administrator's Manual

Network Configurations

You can make custom network configurations.
Topics

IPv4 and IPv6 Wired Network Settings

DHCP Option for IPv4
DHCP Option for IPv6
VLAN
Wi-Fi
Real-Time Transport Protocol (RTP) Ports
Network Address Translation (NAT)
Internet Port and PC Port
VPN
Quality of Service (QoS)
802.1x Authentication
TR-069 Device Management
IPv4 and IPv6 Wired Network Settings
You can configure the devices to operate in IPv4, IPv6, or dual-stack (IPv4/IPv6) mode.
After establishing wired network connectivity, the devices obtain the IPv4 or IPv6 network settings from a Dynamic
Host Configuration Protocol (DHCPv4 or DHCPv6) server. We recommend using DHCP where possible to elim-
inate repetitive manual data entry.
You can also configure IPv4 or IPv6 network settings manually.
Note
: Yealink devices comply with the DHCPv4 specifications documented in
RFC 3315
umented in .
Topics

Wired Network IP Addressing Mode Configuration

IPv4 Wired Network Configuration
IPv6 Wired Network Configuration
Wired Network IP Addressing Mode Configuration
The following table lists the parameters you can use to configure IP addressing mode for the wired network.
Parameter static.network.ip_address_mode
Description It configures the IP addressing mode for the wired network.
0-IPv4
Permitted
1-IPv6
Values
2-IPv4 & IPv6
Default
0
Web UI
Network > Basic > Internet Port > Mode (IPv4/IPv6)
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > WAN Port > IP Mode
Phone UI
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IP Mode
[1]
<y0000000000xx>.cfg
Network Configurations
RFC 2131
, and DHCPv6 specifications doc-
23