Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Values
Default
Blank (no prompt for entering the unlock password)
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Dsskey Page Reset Configuration
The following table lists the parameter you can use to configure reset dsskey page.
features.dsskey_page_reset.call_estab-
Parameter
lished.enable
It enables or disables the phone to automatically switch to a specified dsskey page when a call is
Description
established.
0-Disabled
Permitted
Values
1-Enabled
Default
0
Supported
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Devices
Parameter features.dsskey_page_reset.call_established.page <y0000000000xx>.cfg
It controls which dsskey page the phone automatically switches to when a call is established.
Description
Note: It works only if "features.dsskey_page_reset.call_established.enable" is set to 1 (Enabled).
Permitted
Integer from 1 to 3
Values
Default
1
Supported
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Devices
Parameter features.dsskey_page_reset.enable
Description It enables or disables the phone to automatically switch to a specified dsskey page when all calls end.
0-Disabled
Permitted
Values
1-Enabled
Default
0
Supported
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Devices
Parameter features.dsskey_page_reset.page
It controls which dsskey page the phone automatically switches to when all calls end.
Description
Note: It works only if "features.dsskey_page_reset.enable" is set to 1 (Enabled).
Permitted
Integer from 1 to 3
Values
Default
1
Supported
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Devices
Enhanced DSS Keys
Enhanced DSS Keys (EDK) enables users to customize the functions of the phone's DSS keys.
270
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg