Notification Popups; Notification Popups Configuration - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
When using multiple keyboards, you can tap

Notification Popups

Notification popups feature allows the IP phone to pop up the message when it misses a call, forwards an incoming
call to another party, receives a new voice mail or a new text message.
The following shows an example of receiving a new voice mail:
Topic

Notification Popups Configuration

Notification Popups Configuration
The following table lists the parameters you can use to configure notification popups.
Parameter features.voice_mail_popup.enable
It enables or disables the phone to pop up the message when it receives a new voice mail.
If the message disappears, it will not pop up again unless the phone receives a new voice mail or the
Description
user re-registers the account that has unread voice mail(s).
Note: It works only if "account.X.display_mwi.enable" is set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default
1
Web UI Features > Notification Popups > Display Voice Mail Popup
Parameter features.missed_call_popup.enable
It enables or disables the phone to pop up the message when it misses a call.
Description
Note: It works only if "account.X.missed_calllog" is set to 1 (Enabled).
Permitted
0-Disabled
Values 1-Enabled
Default 1
Web UI
Features > Notification Popups > Display Missed Call Popup
Parameter features.forward_call_popup.enable
It enables or disables the phone to pop up the message when it forwards an incoming call to another
Description
party.
Permitted
0-Disabled
Values 1-Enabled
246
to change the language of the keyboard.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg