Web User Interface - Yealink T4 Series User Manual

Web User Interface

Note
Downloaded from ManualsNet.com
If you want to
Delete text you
entered.
Delete an entire field
of data.
In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of your
new phone by pressing the OK key on the phone when the phone is idle. Enter the IP address
(for example, http://192.168.0.10 or 192.168.0.10 for IPv4; http://[2005:1:1:1:215:65ff:fe64:6e0a]
or [2005:1:1:1:215:65ff:fe64:6e0a] for IPv6) in the address bar of a web browser on your PC. The
default administrator user name and password are both "admin" (case-sensitive).
The access to the Advanced settings of the Account or Network via web user interface may be
blocked by the web browser (
plugin".
search engine
Then you can
0.
- If it is in the numeric (123) or alphanumeric
(2aB) input mode, it will provide the special
character + by long pressing about 2 seconds
on the dialing/pre-dialing screen.
For key:
It only provides the pound character #.
-
For key:
- If it is in the uppercase (ABC), lowercase (abc),
uppercase and lowercase (Abc) or
alphanumeric (2aB) input mode, it will provide
the following special characters:
*.,'?!\-()@/:_;+&%=<>￡$¥ ¤ []{}~^¡ ¿ § #"|.
If it is in the numeric (123) input mode, it will
-
provide the following special
characters: .*:/@[].
Press or to position the cursor to the right
of the text you want to delete, and then press the
Delete soft key or tap
at a time.
Swipe your finger to the left or right to select the
entire field of data, so that the data is highlighted,
and then tap the Delete soft key or
available on the SIP-T48S/T48G IP phone.
for example,
Chrome, Firebox) if you have installed "Adblock Plus
to delete one character
. It is only
Overview
29