Conference; Conference Type Configuration; Local Conference Configuration - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Parameter transfer.dsskey_deal_type
It configures the transfer mode for the DSS key. When the user presses the DSS Key during a call, the
DSS Key behavior depends on the transfer mode.
Description
Note: This feature is only applicable to the Speed Dial key, BLF/BLF List key or Transfer key with an
assigned value.
0-New Call
1-Attended Transfer
Permitted
2-Blind Transfer
Values
4-Optional, users can choose to transfer the call via New Call, Attended Transfer or Blind Transfer
manually (not applicable to T48G/T46G/T42G/T41P/T29G phones)
Default 2
Supported
All phones except T19(P) E2 and CP920
Devices
Web UI
Features > Transfer > Transfer Mode via Dsskey

Conference

The Yealink phones support local conference and network conference.
Topics

Conference Type Configuration

Local Conference Configuration

Network Conference Configuration
Conference Type Configuration
You can specify which type of conference to establish.
The following table lists the parameter you can use to set a conference type.
Parameter account.X.conf_type
Description It configures the conference type for a specific account.
0-Local Conference
Permitted
Values
2-Network Conference
Default 0
Web UI Account > Advanced > Conference Type
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Local Conference Configuration
The local conference requires a host phone to process the audio of all parties. Yealink phones support up to 3
parties (5 parties for CP920/T42U/T43U/T53/T53W phones, 10 partes for T46U/T48U/T54W/T57W) (including your-
self) in a local conference call.
Note
: Codecs that can support 10-party conference: G722, G723, G726, G729, PCMA, PCMU, and iLBC; the Opus codec can
only support 5-party conference.
The following table lists the parameters you can use to configure the local conference.
411
[1]
<y0000000000xx>.cfg
<MAC>.cfg