Example: Setting A Custom Logo Display; Call Display - Yealink SIP-T5 Series Administrator's Manual

Permitted
URL within 511 characters
Values
Default Blank
Supported
All black-and-white screen phones
Devices
Web UI Features > General Information > Upload Logo
Parameter phone_setting.lcd_logo.show_time
It configures the time (in seconds) the logo is displayed.
If it is set to 0, after loading the logo, if there is no wake-up operation, it will not exit the logo display
Description
page.
Note: It works only if "phone_setting.lcd_logo.mode" is not set to 0 (Off).
Permitted
Integer from 0 to 21600
Values
Default
3
Supported
T27G, T41S, T42S, T42U, T43U, T53, T53W, CP920
Devices
Parameter lcd_logo.delete
Description It deletes all custom logo files.
Permitted
http://localhost/all
Values
Default Blank
Supported
All black-and-white screen phones
Devices

Example: Setting a Custom Logo Display

The following example shows the configuration for uploading a custom logo picture "logo.dob", and then setting it to
display on the phone idle screen. The logo picture is customized and placed on the provisioning server
"192.168.10.25".
Example
lcd_logo.url =http://192.168.10.25/logo.dob
phone_setting.lcd_logo.mode =2
After provisioning, the phone displays the custom logo screen and the idle screen alternately.

Call Display

By default, the phones present the contact information (including avatar and identity) when receiving an incoming
call, dialing an outgoing call or engaging in a call.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
229