Idle Clock Display; Idle Clock Display Configuration; Logo Customization - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Format
M/MM
MMM
M is used more than three times (for example, MMMM)
D is used once or more than once (for example, DD)
W/WW
W is used more than twice (for example, WWW,
WWWW)

Idle Clock Display

Idle clock is displayed on the center of the idle screen by default. You can hide the idle clock, and then the time and
date are displayed in the right of the status bar.
It is only applicable to T54W phones.
Topic

Idle Clock Display Configuration

Idle Clock Display Configuration
The following table lists the parameter you can use to configure the idle clock display.
Parameter phone_setting.idle_clock_display.enable
Description It enables or disables the phone to display the idle clock.
Permitted
0-Disabled
Values 1-Enabled
Default 1
Supported
T54W
Devices
Phone UI Menu > Basic > Display > Idle Clock > Idle Clock Display

Logo Customization

Since a logo is a visual entity signifying an organization or company, you can upload a custom logo shown on the
LCD screen. The logo screen and the idle screen display alternately.
The following shows a system logo (Yealink logo) displayed on T27G:
226
Description
For example, 2016, 2017, 2018...
It represents a two-digit month.
For example, 01, 02,..., 12
It represents the abbreviation of the month.
For example, Jan, Feb,..., Dec
It represents the long format of the month.
For example, January, February,..., December
It represents a two-digit day.
For example, 01, 02,..., 31
It represents the abbreviation of the day of week.
For example, Mon, Tue,..., Sun
It represents the long format of the day of week.
For example, Monday, Tuesday,..., Sunday
<y0000000000xx>.cfg