Example: Setting A Line Key As Forward Key - Yealink SIP-T5 Series Administrator's Manual

linekey.1.label =Sell
After provisioning, you can easily press the Group Pickup key (line key 1) to pick up an incoming call to any phone
within a predefined group of phones.
Note
: If the "linekey.X.value" is not assigned with a group pickup code, the Park key will invoke the group pickup code set by
"features.pickup.group_pickup_code" or "account.X.group_pickup_code".

Example: Setting a Line Key as Forward Key

When the phone receives an incoming call, you can press a Forward key to forward the incoming call to the preset
number.
When the phone is idle, the key behavior depends on the forward modes:
Forward Modes
The destination number is configured:
Press the Forward key to activate/deactivate the always forward fea-
ture or switch the target among Forward keys.
Phone Mode
The destination number is blank:
Press the Forward key to enter the forward setting screen or activ-
ate/deactivate the forward feature (if forward has been configured
from the Call Forward menu).
Custom Mode Press the Forward key to enter the forward setting screen.
The following example shows the configuration for Forward keys.
Scenario Conditions
features.fwd.allow = 1
features.fwd_mode = 0
forward.idle_access_always_fwd.enable = 0
Example
######Set a Forward key for Bill######
linekey.1.type = 2
linekey.1.line =1
linekey.1.value =4603
linekey.1.label =Bill
######Set a Forward key for Tom######
linekey.2.type = 2
linekey.2.line =1
linekey.2.value =4605
linekey.2.label =Tom
After provisioning, you can easily press the Forward key (line key 1 or line key 2) to activate/deactivate the always
forward feature. For example, after pressing line key 1 to activate always forward and forward all calls to Bill (4603),
you can press the line key 1 to deactivate always forward, or press line key 2 to switch the forward target and for-
ward all calls to Tom (4605).
Key Behavior
Related Topic
Call Forward
Phone Customization
261