Call Display Configuration - Yealink SIP-T5 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
You can configure what contact information presents and how to display the contact information. If the contact exists
in the phone directory, the phone displays the saved contact name and number. If not, it will use the Calling Line
Identification Presentation (CLIP) or Connected Line Identification Presentation (COLP) to display the contact's iden-
tity.
Topic

Call Display Configuration

Call Display Configuration
The following table lists the parameters you can use to configure the call display.
Parameter phone_setting.contact_photo_display.enable
It configures whether to display contact avatar when it receives an incoming call, dials an outgoing
Description
call or engages in a call.
0-Never, do not display contact avatar no matter whether the contact avatar exists or not
Permitted
1-Always, display the customized contact avatar if it exists; display the built-in avatar if the customized
Values
contact avatar does not exist
2-Adaptive, display the customized contact avatar if it exists; otherwise, do not display
Default 1
Supported
All color screen phones
Devices
Web UI
Settings > Call Display > Contact Photo Display Mode
Parameter phone_setting.little_contact_photo_display.enable
It enables or disables the phone to display the little contact photo when it receives an incoming call,
dials a call or is in a call.
Description
Note: It works only if "phone_setting.contact_photo_display.enable" is set to 1 (Always) or 2 (Adapt-
ive).
0-Disabled
Permitted
Values
1-Enabled, the phone can display the full 16-digit number.
Default 1
Supported
T46U, T46S
Devices
Parameter account.X.picture_info_enable
It enables or disables the phone to download the picture from the URL contained in the Call-Info
header of the INVITE message.
Description
Format of call info:
230
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<MAC>.cfg