Time And Date Manually Configuration - Yealink SIP-T5 Series Administrator's Manual

Web UI Settings > Time&Date > Start Date
Parameter local_time.end_time
It configures the end time of the Daylight Saving Time (DST).
Description
Note: It works only if "local_time.summer_time" is set to 1 (Enabled).
Month/Day/Hour-DST by Date, use the following mapping:
Month: 1=January, 2=February,..., 12=December
Day: 1=the first day in a month,..., 31= the last day in a month
Hour: 0=0am, 1=1am,..., 23=11pm
Month/Week of Month/Day of Week/Hour of Day, Offset Days Forward-DST by Week, use the following
mapping:
Permitted
Values
Month: 1=January, 2=February,..., 12=December
Week of Month: 1=the first week in a month,..., 5=the last week in a month
Day of Week: 1=Monday, 2=Tuesday,..., 7=Sunday
Hour of Day: 0=0am, 1=1am,..., 23=11pm
Offset Days (Optional.): -1=one day offset forward, -2-two days offset forward,..., -6-six days offset for-
ward
Default 12/31/23
Web UI Settings > Time&Date > End Date
Parameter local_time.offset_time
It configures the offset time (in minutes) of Daylight Saving Time (DST).
Description
Note: It works only if "local_time.summer_time" is set to 1 (Enabled).
Permitted
Integer from -300 to 300
Values
Default 60
Web UI Settings > Time&Date > Offset (minutes)
Parameter auto_dst.url
It configures the access URL of the DST file (AutoDST.xml).
Description
Note: It works only if "local_time.summer_time" is set to 2 (Automatic).
Permitted
URL within 511 characters
Values
Default Blank

Time and Date Manually Configuration

You can set the time and date manually when the phones cannot obtain the time and date from the NTP time
server.
The following table lists the parameter you can use to configure time and date manually.
Parameter local_time.manual_time_enable
Description It enables or disables the phone to obtain time and date from manual settings.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
223