Yealink SIP-T57W Quick User Manual

Yealink SIP-T57W
Desktop Telephone
Quick User Guide
This guide covers the basic features and operation of the
Yealink model T-57W desktop phones.
For more information including a video tutorial, please
visit the Star2Star Knowledge Base at:
knowledge.star2star.com
Note that these instructions cover operation of this phone
on both the Star2Star Business Voice and Business Voice+
systems.
Copyright 2020, Star2Star, . Star2Star is a registered trademark. V 1.00 6-16-20

About Your Phone:

Your phone features a large color touch screen. There are
six on-screen soft keys on each side of the screen, and four
color-coded icons along the bottom of the screen.
The keys along the side of the screen are programmable, and
change depending on the configuration of your phone. In this
example, there are three line keys and three park buttons.
The keys on the right side have not been programmed, so
they are blank. The bottom right "More" softkey displays 18
additional softkeys in the center part of the screen.
The four icons along the bottom of the screen are labeled
History, Directory, DND, and Menu. We'll explain these keys
in a later section.
There are 10 keys on the lower section of the phone,
surrounding the numeric dial pad.
The + and - buttons below the 4-way keypad adjust the
volume. Pressing these keys when you are not engaged in a
call adjusts the ringer volume. Pressing them while you are in
a call adjusts the volume of the handset, speaker, or headset.
The larger rectangular key
key. Press this key to make or answer a call using the
built-in speakerphone.
The other keys are:
Activates a headset (if connected)
Mutes the microphone
Listen to your voice messages
Place a call on Hold
Redial the last call
Transfer a Call

Placing a Call:

Using the Handset:
• Pick up the handset
• Enter the number on the dial pad
• Press the Send softkey
Using the speakerphone:
• Press the Speakerphone key
• Enter the number on the dial pad
• Press the Send soft key.
Using the headset:
• Press the Headset key
• Enter the number on the dial pad
• Press the Send soft key.

Answering Incoming Calls:

Using the handset: Pick up the handset.
Using the speakerphone: Press
Using the headset: press
is the speakerphone
.