Alert-Info: Info=Info Text;X-Line-Id=0; Distinctive Ring Tones Configuration - Yealink SIP-T5 Series Administrator's Manual

Example:
Alert-Info: http://192.168.0.12:8080/Custom.wav

Alert-Info: info=info text;x-line-id=0

When the Alert-Info header contains an info text, the phone will map the text with the Internal Ringer Text pre-
configured (or "distinctive_ring_tones.alert_info.X.text" is configured) on the IP phone, and then play the ring tone
associated with the Internal Ringer Text (the ring tone can be configured by the parameter "distinctive_ring_
tones.alert_info.X.ringer"). If no internal ringer text maps, the phone will play the preconfigured local ring tone in
about 10 seconds.
Example:
Alert-Info: info=family;x-line-id=0
Alert-Info: <http://10.1.0.31 > ;info=family
Alert-Info: <http://10.1.0.31 > ;info=family;x-line-id=0
Auto Answer
If the INVITE request contains the following type of strings, the phone will answer incoming calls automatically
without playing the ring tone:
Alert-Info: Auto Answer
l
Alert-Info: info = alert-autoanswer
l
Alert-Info: answer-after = 0 (or Alert-Info: Answer-After = 0)
l
Alert-Info: Intercom
l
If the auto answer tone feature is enabled, the phone plays a warning tone to alert you before answering the incom-
ing call.
Related Topic
Auto Answer

Distinctive Ring Tones Configuration

The following table lists the parameters you can use to configure distinctive ring tones.
Parameter account.X.alert_info_url_enable
It enables or disables the phone to download the ring tone from the URL contained in the Alert-Info
Description
header.
Permitted
0-Disabled
Values 1-Enabled
Default 1
Web UI Account > Advanced > Distinctive Ring Tones
Parameter features.alert_info_tone
It enables and disables the phone to map the keywords in the Alert-Info header to the specified
Description
Bellcore ring tones.
Permitted 0-Disabled
1-Enabled
Values
Default 0
Parameter distinctive_ring_tones.alert_info.X.text
[1]
<MAC>.cfg
<y0000000000xx>.cfg
[2]
<y0000000000xx>.cfg
Audio Features
154