Parameter phone_setting.page_tip
It enables or disables the breathing light and page icon to indicate different status of line keys on the
Description
non-current page.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Web UI
Dsskey->Line Key->Enable Page Tips
Expansion Module Page Tips
On expansion module EXP50, the page tips feature supports page switch key LED to indicate that BLF monitored user
receives an incoming call on the non-current page.
It is not applicable to CP960 phones.
Topics
Expansion Module Page Tips Indicator
Expansion Module Page Tips Configuration
Expansion Module Page Tips Indicator
The following table lists the status of page switch key LED displayed on the expansion module:
Models
LED Status
Icons
EXP50
Flashing red
Expansion Module Page Tips Configuration
The following table lists the parameters you can use to configure expansion module page tips.
Parameter expansion_module.page_tip.blf_call_in.enable
It enables or disables the page switch key LED on the expansion module to indicate when BLF monitored
user receives an incoming call on the non-current pages.
Description
Note: It is only applicable to EXP50 expansion modules connected to the T58V/T58A/T56A phones.
Permitted
0-Disabled
Values
1-Enabled
Default
1
Parameter expansion_module.page_tip.blf_call_in.led
It configures the page switch key LED status on the expansion module when BLF monitored user receives
an incoming call on the non-current pages.
This value uses the same macro action string syntax as an Enhanced DSS key.
If it is left blank, the default value takes effect.
Description
Example:
expansion_module.page_tip.blf_call_in.led = $LEDr300o300$
It means an infinite loop for page switch key LED status: glow red for 300ms and then be in the off state
/
The BLF monitored user receives an incoming call on the non-current pages.
<y0000000000xx>.cfg
Description
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
95