Page Tips For Expansion Module - Yealink SIP-T2 Series Administrator's Manual

Details of the Configuration Parameter:
phone_setting.page_tip
Description:
Enables or disables the page icon and page switch key LED to indicate different states of line
keys on the non-current page.
0-Disabled
1-Enabled
Note: It is only applicable to
SIP-T54S/T52S/T46G/T46S/T42G/T42S/T41P/T41S/T29G/T27P/T27G IP phones.
Web User Interface:
Dsskey->Line Key->Enable Page Tips
Phone User Interface:
None
To configure the page icon to indicate status via web user interface:
Click on Dsskey->Line Key.
1.
Select Enabled from the pull-down list of Enable Page Tips.
2.
Click Confirm to accept the change.
3.

Page Tips for Expansion Module

You are allowed to configure the page switch key LED on the expansion module to indicate
when BLF monitored user receives an incoming call on the non-current page. It is only
applicable to EXP50 connected to the SIP-T54S/T52S IP phones.
Parameter
Configuring Basic Features
Permitted Values
0 or 1
Default
0
211