Page Tips For Expansion Module - Yealink CP969 Administrator's Manual

To configure enable page tips feature via web user interface:
Click on DSSKey->Line Key.
1.
Select Enabled from the pull-down list of Enable Page Tips.
2.
Click Confirm to accept the change.
3.

Page Tips for Expansion Module

You are allowed to configure the page switch key LED on the expansion module to indicate
when BLF monitored user receives an incoming call on the non-current page. It is only
applicable to EXP50 connected to the SIP-T58V/T58A/T56A IP phones.
The following table lists the page switch key LED to indicate different statuses:
LED Status
Off
Solid green
Flashing red
Procedure
Page tips for expansion module can only be configured using the configuration files.
Central Provisioning
(Configuration File)
Indicates non-current pages.
Indicates current page.
The BLF monitored user receives an
incoming call on the non-current pages.
Configure page tips for the page switch keys
of the expansion modules.
<y0000000000xx>
.cfg
Parameter:
expansion_module.page_tip.blf_call_in.enable
Configuring Advanced Features
Description
171