Apply, Revert, Default, And Clone Buttons; Logout; Online Help - VBrick 9000 Admin Manual

Apply, Revert, Default, and Clone Buttons

Depending on screen resolution, it may be necessary to scroll down the page to see additional
information and fields. The
the bottom of the page when appropriate. You may also see
and other buttons depending on what page you are on.
Button Description
Apply Applies the changes made on the screen to the encoder. Note that these
changes will not be stored in the encoder's flash memory until you click
This means if the encoder is powered down the changes will be lost. Don't
forget to save the configuration.
Revert Aborts all changes made on the screen and returns to the values that were
present prior to the first change that was made. Note that this only applies to
changes made prior to the last "apply."
Default Returns to the default settings for all parameters on the page. You must still
click
Clone
Finish Edit Ends the editing session and displays View mode.
End Other E End an edit session currently in progress by another user. Use with care; any
dit Session unsaved changes made by that user will be lost.
Save

Logout

Click on the Configuration Menu to exit VBAdmin and automatically end any editing
Logout
sessions. After logging out of VBAdmin, it is a good idea to close the window and exit your
browser.

Online Help

A link to the Online help system is available from the
the VBAdmin page. This help system has a powerful full-text search engine that can quickly
find the information you need.
You may also click on the question mark hyperlink in the upper-right corner of each page to
get context-sensitive help for that specific page. If a page has several fields or areas of
interest that may not fit on one page, the topics will be linked at the bottom of the page.
8
, and
Apply Revert
for the settings to take effect.
Apply
buttons however, are always shown at
Default
,
Clone Refresh
When configuring the Video Input on
multi–channel encoders, this button lets
you apply one set of configuration
parameters to one or more of the other
channels.
Writes all applied changes to Flash
memory. If you do not click Save after
editing, any changes you made are lost if
the encoder loses power or is reset.
Configuration Menu
© 2015 VBrick Systems, Inc.
, ,
Reset Counters
.
Save
on the left side of