Maintenance: Default All Configuration; Maintenance: Read/Write Configuration; Maintenance: Read/Write > Read From Device - VBrick 6000 series Admin Manual

Total System Up
Time
Note The Device Information table creates a date and time stamp for every power or reset
event. When SNTP is enabled, the unit must reboot to synchronize time with the
SNTP server time. If the time moves dramatically forward (or backward), a
discontinuity may appear in the device table because of the SNTP time correction.

Maintenance: Default All Configuration

This menu allows the user to default all the configuration parameters of the VBrick.
Default All
Factory Defaults

Maintenance: Read/Write Configuration

Maintenance: Read/Write > Read From Device
The Read/Write Configuration page allows you to read configuration parameters from the
VBrick to a file, as well as write configuration parameters from a file to the VBrick. The file is
an .xml file and Internet Explorer is the assumed browser.
Note The VBrick appliance the .xml file is read from, and VBrick appliance the .xml file is
written to, must be running the same version of code.
86
Displays the total time that the unit has been powered up.
Sets all parameters except IP address, Subnet Mask, Gateway IP, User
Names, Passwords and System Date Time.
Sets all parameters to factory defaults with the exception of System
Date and Time.
© 2009 VBrick Systems, Inc.