VBrick 9000 Admin Manual page 48

Field/Button
Refresh Count and
Status
Reset Counts
Read or Write Script
Files
Event Enable
Event Stable Time
Event Count
Event Script Status
Event Script Control The Run Script buttons lets you run each script without needing the
40
Description
Refresh entire page including Event Counts and Event Script Status.
Reset Event Counts only.
Click the button to login to the encoder via FTP and
FTP Scripts
manage script files. Requires a valid user name and password (default
= ). Script files have explicit, predefined names as
admin|admin
explained above. Note: If you have problems logging into the FTP
server, use the following command to login to the
Windows Explorer.
ftp://admin:admin@<encoder_ip_address>/scripts
Allows the user to Enable/Disable Event Triggering for each input
event.
Allows the user to enter the amount of time in milliseconds that each
input event has to be stable at the active level before the script will
be executed.
Displays the number of times each input event has occurred.
Displays current status information for each event script.
input event. Use this method to test the script.
folder in
scripts
© 2015 VBrick Systems, Inc.