Snmp Traps - VBrick 9000 Admin Manual

Use this page to manage SNMP passwords. The same fields are used to define passwords for
all users.
Field
User Name
Authentication Password Enter password. Cannot exceed 20 characters. May include any
Authentication Protocol
Privacy Password
Security Level

SNMP Traps

To access the

1. Navigate to
VBrick supports SNMP v2 and SNMP v3 traps. SNMP traps are a subset of the SNMP
management component of the encoder. Use of any element of the SNMP management
system requires use of an SNMP browser or SNMP manager application (not supplied). The
SNMP MIB, which formally defines the SNMP interface to the encoder, is contained within
the install directory of the VBrick release or from the Downloads page on the VBrick
website. The SNMP MIB is located in
is:
Program Files\VBrick\VBrick 7000-8000-9000\download\ReleaseVx_x_xx
VBrick 9000 Encoder Admin Guide
Description
Read-only. Set user name on Usernames & Passwords page.
combination of alphanumeric characters but only the following
special characters:
See Table 2 on the Usernames & Passwords topic for default
values.
Select protocol: HMAC-MD5 or HMAC-SHA.
Required.
• No Authentication, No Privacy (Default).
• Authentication. No Privacy.
• Authentication and Privacy (CBC-DES)
fields:
SNMP Traps
>
System Configuration
vbrickSystem.mib
~ ! # $ ^ * + & [ ] { } | < >
Advanced Configurations
and the default installation directory
System Configuration
> .
SNMP Traps
45