VBrick 9000 Admin Manual page 98

Field
SDP File URL
Choose Transmitter
Enable Transmitter
Transmitter Name
Stream Select
Transport Type (read-only)
90
Description
RTP only. Click to play (open) or save the .sdp file. The .sdp
file is retrieved via the HTTP server on the encoder. Paste
this URL into a browser to launch the stream "out-of-band"
using the .sdp file.
The URL address for the .sdp file is based on the program
and transmitter number, for example:
AAA.BBB.CCC.DDD/vbStreamXdY.sdp
program number, is the transmitter number and
Y
is encoder IP address.
AAA.BBB.CCC.DDD
Select from dropdown list. The number of transmitters is
configured on the Encoder Configuration > Global page.
Use to individually disable a transmitter. Default =
Disabled. The transmitter must be enabled for streaming to
occur.
Enter a user-friendly name for the selected transmitter.
Select a configured stream.
• RTP – Default. RTP is supported by the VBrick 9000
Series decoder.
• MPEG2TS – Multiplexes the digital video and audio into
one bit stream. Supported by most hardware decoders.
• RTMP – Real Time Messaging Protocol. Multimedia
streaming protocol used in Adobe Flash.
• SMOOTH – Smooth Streaming Transport Type is an IIS
Media Services extension that enables adaptive streaming
of media to clients over HTTP.
http://
where: is the
X
© 2015 VBrick Systems, Inc.