VBrick 9000 Admin Manual page 64

When making configuration changes, the slot shown in bold (see Figure 1 below) is the
currently selected slot, an asterisk (*) next to the Slot/Channel header near the top of the
page indicates there are pending changes to the configuration which have not yet been
"applied," and a red exclamation point indicates a configuration error in that slot.
Figure 1. Video Configuration: Part 1 – Video Input
Keep in mind that any currently active streams will be momentarily disrupted every time you
click . To avoid intermittent disruptions on units with multiple slots and channels, wait
Apply
until you have configured changes on all slots and channels, and then click . This
Apply
behavior only applies to the > and pages. On all other
Encoder Configuration Video Audio
pages you must click before you exit the page.
Apply
Figure 2. Quad Channel Encoder (no SDI)
Figure 3. Dual Channel Encoder (with SDI)
56 © 2015 VBrick Systems, Inc.