Servers Announce Settings; Servers External Announce Settings - VBrick 9000 Admin Manual

Servers Announce Settings

To access

Announce Settings
1. Navigate to
This section contains parameters that are used to modify announcements from the encoder.
Announcements are advertisement packets that are transmitted by VBrick encoders to other
VBrick encoders and VBrick applications such as the VEMS Portal Server and StreamPlayer.
They are used to identify streams present in the network.
Field
Announce
Use Global Announce IP
and Port
Destination IP Address
Destination Port
Servers Page Topics:

Servers Announce Settings

Servers External Announce Settings

Servers External Announce Settings
To access

External Announce Settings
1. Navigate to
These settings configure an external announcement that can be used when the stream is
reflected to a third-party server or a (future) VBrick reflector.
102
fields for a
>
Encoder Configuration
Description
This section is used to announce the RTSP streams to the local
network allowing viewable RTSP announcements in programs
like StreamPlayer. The unit must be on the same segment of the
network or the router must be configured to retransmit
broadcast packets for the announcements to be accessible using
the IP address 255.255.255.255. Default = disabled.
Use Announce Settings (IP Address for Servers and Port)
defined on Encoder Configuration > Programs page. If
checked, the Destination IP Address and Destination Port fields
are greyed out.
The destination IP address the announcement is sent to. By
default, the announcement is sent to the multicast network. If
using an VEMS Portal Server, enter the Portal Server IP address.
The destination port to which the announcement is sent.
>
Encoder Configuration
:
Server
>
Servers Announce Settings
fields for a :
Server
>
Servers External Announce Settings
section.
section.
© 2015 VBrick Systems, Inc.