System Reset; Front Panel Settings - VBrick 9000 Admin Manual

Link the Encoder to VBrick Rev

System Reset

To access the

1. Navigate to
Field
Reset
General Page Topics:

System Identification Settings
System Time Settings
Additional System Settings
System Reset

Front Panel Settings

Link the Encoder to VBrick Rev
Front Panel Settings
To access the

1. Navigate to
You can enable/disable user-defined text (typically the host name and IP address) that is
shown on the encoder's front panel LCD display.
For more information about the front panel see the Front Panel LCD Display Messages topic
in the Getting Started Guide.
Field
Display IP Address
VBrick 9000 Encoder Admin Guide
button:
Reset
>
System Configuration
Description
Resets (i.e. reboots) the encoder. A reset does not change, save, or
reset any configuration parameters. You must be in edit mode to
perform a system reset.
fields:
Front Panel
>
System Configuration
Description
Check to display the encoder IPv4 address. Default = enabled.
>
General System Reset
> section.
General Front Panel
System Configuration
section.
21