Archivers - VBrick 9000 Admin Manual

Field
External Announce
Use Global Announce IP
and Port
Destination IP Address
Destination Port
URL
Servers Page Topics:

Servers Announce Settings
Servers External Announce Settings

Archivers

To access the

1. Navigate to
Transport Streams only. An
internal or external hard drives.
Archivers reference a stream which is comprised of the following 3 components:
• Video Rate
• Audio Rate
• Transport Type.
Archiving can be controlled locally using the
from VEMS. VEMS can start and stop an archive and FTP files to and from the encoder. You
can also set the start
you power on the encoder or insert an external storage device. Archiving can also be started
in Presenter encoders by pressing the
The encoder supports a variety of internal and external storage devices. If the encoder is
configured with a storage device, you can create an archive of any
Once the archiving is complete, the file can be moved or FTPed to a VOD server, a file
VBrick 9000 Encoder Admin Guide
Description
This section is used to announce RTSP streams to a network
device outside of the broadcast domain.
Use Announce Settings (IP Address for Servers and Port)
defined on Encoder Configuration > Programs page. If
checked, the Destination IP Address and Destination Port fields
are greyed out.
The destination IP Address or Host Name the announcement is
sent to. If using a Portal Server, enter the Portal Server IP
address. If using a reflector, enter reflector server IP address.
The destination port the announcement is sent to.
The URL of the reflector (i.e the source of the reflected
stream). This URL is embedded in the announcement.
fields:
Archivers
>
Encoder Configuration
is used to store a local copy of a stream on existing
Archiver
to
Mode Automatic Start
Record
.
Archivers
and buttons or it can be controlled
Start Stop
and the archiver will automatically start when
button.
MPEG2TS
Encoder Configuration
transport stream.
103