Logging - VBrick 9000 Admin Manual

Logging

To access the

1. Navigate to
Logging of certain events can be stored both locally (within the VBrick device) or externally
(for example on a server). Local logs are stored in volatile memory. For preservation of
information, it is recommended that remote logging be utilized. Remote servers generally
offer ample storage and offer the additional benefit of collecting log information from
several VBricks simultaneously. When logging externally, specify either the IP address or
hostname of the actual server using the
logging is enabled, the log information is sent via SNMP traps. When you enable logging, be
sure to set the system date and time (See: System Time Settings) or select a network time
server in order to get accurate time stamps in the logs.
Field
Log Time Zone
Trap Log Local
Trap Log Remote
General Config Log
Local
General Config Log
Remote
Script Config
Log Local
Script Config
Log Remote
System Event Log
Local
System Event Log
Remote
Remote Event Log
Destination
38
fields:
Logging
>
System Configuration
Remote Event Log Destination
Description
The time for each logged event will be recorded in either Local time
or GMT time.
Stores logs locally within the unit. The log file will wrap after 20
events.
Sends log file to an external server.
Stores the log of user initiated configuration changes traps locally
within the unit. The log file will wrap after 20 events.
Sends the log of user initiated configuration changes to an external
server.
Stores the log of script generated configuration changes locally
within the unit. The log file will wrap after 20 events.
Sends the log of the log of script generated configuration changes to
an external server.
Stores the log of system events locally within the unit. The log file
will wrap after 20 events.
Logs systems events to an external server.
Unicast IP address of remote event log server.
Advanced Configurations
> .
Logging
field. If remote
© 2015 VBrick Systems, Inc.