Login - VBrick 9000 Admin Manual

Note: VBAdmin has a read-only
can actually make configuration changes. All VBAdmin screens in this document are
shown in Edit mode.
Table 1. Supported Browsers (VBAdmin) †
Browser
Microsoft Internet Explorer
Mozilla Firefox
Chrome
Safari
† For best results VBrick recommends using the latest version of a supported browser. You must
have session cookies and active scripting enabled in your browser to use VBAdmin.

Login

To login to an encoder:

1. Open a browser and enter the IP address of the encoder in the address bar.
2. Login to VBAdmin with a valid user name and password (case-sensitive), and then click
the button. (The default user name and password is
Log In
It is highly recommended that you use the
default user name and password. The user name and password cannot exceed 20
characters. It may include any combination of alphanumeric characters and only the
following special characters:
~ ! # $ ^ * + & [ ] { } | < > -
3. If using an encoder with presenter features enabled, view: Presenter Mode Login for
additional log-in options.
End User License Agreement (EULA)
The first time you launch VBAdmin you will need to page down and click on
. The application will not run if you decline to accept the EULA.
Agreement
After accepting the EULA, VBAdmin will be in
when using Telnet or SSH and is reset when you apply a
Configuration > Manage Configuration) reset or upgrade the encoder's software.
2
mode and an interactive
View
Version
9.0 or higher
26.0 or higher
31.0 or higher
6.1 (mac) or higher
Maintenance
mode. Note that the EULA is not shown
Edit
Factory Default
mode where you
Edit
)
admin:admin
pages in VBAdmin to change the
Accept License
(System
© 2015 VBrick Systems, Inc.