VBrick 9000 Admin Manual page 41

Field
External SNMPv1
and SNMPv2 Access
External SSH Server
No Login For Viewer
Files
Remote Support Poll
RTSP Server Port
VBAdmin Server Port
Secure VBAdmin
Server Port
VBrick 9000 Encoder Admin Guide
Description
Default = Enabled. You can use both SNMP v1/v2, and v3. For
tightest security, set parameter to Disabled and use SNMPv3 only.
SSH – Secure Shell is a replacement for Telnet. It allows data to
pass between two networked devices using a secure channel. SSH-
1 and SSH-2 are supported.
• Disabled - Prevents you from managing the encoder using
SSH.
• Enabled - Allows SSH-1 and SSH-2 clients.
• SSH-2 Only – Default.
Default = Enabled. If enabled the encoder will serve a
transmitter's SDP file without requiring a login with username and
password. This allows any device (players, decoders, etc.) to
acquire the SDP file directly from the encoder. If disabled you
may need to provide another method for delivering the SDP file to
the receiving device, such as copying the file to another server.
Default = Disabled. The default enables continuous polling
through the firewall. If desired, you can enable polling only when
you need to establish a remote connection. This will not reboot the
encoder. Remote Support Polling enables a unique built-in
mechanism that allows VBrick Support Services to help configure
or troubleshoot an encoder—even if it's behind a firewall. When
this feature is enabled (and you provide the user name and
password), Support Services can establish a secure, tunneled
connection to the VBAdmin interface of the encoder.
Default = 554. Sets the RTSP server port.
Specifies the listener port for management and HTTP
connections. Default = 80. When the remote VBAdmin user
(client) specifies the http syntax, the port value is generally
omitted. Typically port 80 is the default value used by browsers.
As a matter of consistency, the encoder default VBAdmin Server
Port value is also defaulted to 80. To access a different HTTP
port, the remote VBAdmin client user would specify the URL as
follows:
http://IPaddress:port
address or hostname, and port. This feature is often useful for a
system where HTTP is used to traverse firewalls. The VBAdmin
server port is moved to another location (for example 8080) and
the HTTP Tunneling port is set to 80.
Specifies the listener port for management and HTTPS
connections. Default = 443. When the remote VBAdmin user
(client) specifies the HTTPS syntax, the port value is generally
omitted. Typically port 443 is the default value used by browsers.
As a matter of consistency, the encoder default Secure VBAdmin
Server Port value is also defaulted to 443. To access a different
HTTPS port, the remote VBAdmin client user would specify the
URL as follows:
https://IPaddress:port
encoder IP address or hostname, and port.
System Configuration
where = encoder IP
IPaddress
where
IPaddress
=
33