Edit Mode - VBrick 9000 Admin Manual

It shows all of the slots and channels available and the specific video and audio configuration
settings for each one. This includes
status of each configured
The Dashboard shows the status of up to two slots and four channels (depending on the
hardware you purchased) as well as the
utilization should not exceed 90% (See the Optimize System Performance topic for
CPU
details).
Note: If you are working with an encoder that has presentation features enabled, your
interface or functionality may differ slightly for this section with the ability to see
Presenter Mode status on the Dashboard. See the Presenter Encoder Dashboard topic
if you need more information.

Edit Mode

In order to change configuration settings in the VBrick encoder, you must click the
button to become the active editor so that multiple users cannot be changing parameters at
the same time. After clicking
Session In Progress
mode at any time. Any user can end the current editing session of any other user regardless of
login level—admin or operator. As a best practice, you should click
changes and then click
Note: All configuration screens have a
Online help are shown in
6
Program
, , and
Transmitter Server
utilization for the entire unit. For best results, the
CPU
, the button changes to
Edit
is displayed on the front panel of the encoder. Only one user can be in Edit
and to avoid interfering with other users.
Save Finish Edit
mode, that is after you have clicked the
Edit
and information as well as the current
Stream
.
Archiver
, and the message
Finish Edit
Edit
mode and an
View Edit
© 2015 VBrick Systems, Inc.
Edit
Edit
, make any necessary
mode. Most screens in
button.
Edit