VBrick 9000 Admin Manual page 161

Transmitter Name Transmitter Name (from Encoder Configuration > Transmitters page).
State
Destination
Video Port
Audio Port
Bytes Transferred Use Reset Counters to reset to zero.
IP Packets Sent
VBrick 9000 Encoder Admin Guide
Click on hyperlink to jump to Transmitters page.
• – no transmitter problems detected.
Transmitting
•
Video Input Disabled
•
Audio Input Disabled
• – transmitter has not been enabled.
Disabled
• – ping to unicast destination failed.
Ping Failed
• – IP port failure.
Ports Not Open
• – destination address is a loopback address.
Loopback Address
•
Invalid Authorization
AutoUnicast or RTMP.
• – AutoUnicast server connection issue.
Rejected
• – Video input error.
Video Problem
• – Global Override set.
Global Override
• - Program Override set.
Program Override
• – RTMP error.
Invalid Application
• – one or both of the FEC sockets are not
Not FEC Protected
operational.
• – Video is enabled in the stream but disabled on the
No Video Data
configuration page.
• – Audio is enabled in the stream but disabled on the
No Audio Data
configuration page.
Destination IP Address or Host Name (from Encoder Configuration >
Transmitters page).
RTP Transport
Stream
Configured Configured
port. Transport
Stream port.
Configured N/A
port.
Use Reset Counters to reset to zero.
– no video input
– no audio input.
– user name/password incorrect for
Auto Unicast Auto Unicast
(UDP) (TCP)
Negotiated port. Negotiated
port.
Negotiated port. N/A
Monitor
RTMP
Configured
port.
N/A
153