Security - VBrick 9000 Admin Manual

Field
Type of Service
IP Address
Port

Security

To access the

1. Navigate to
Note: If you disable Telnet, VBAdmin, the Front Panel, and SNMP, the only way to
manage (and re-enable) these parameters is to connect a PC to the serial port on the
encoder and use the Command Line Interface. You should never disable all the
network management interfaces if you are using both COM ports for passthrough.
Field
External Telnet Server
External FTP Server
External VBAdmin
External SNMP
32
Description
The TOS (Type of Service) can be configured in the IP header to
establish packet priority in the network.
Defines the Destination IP Address for Management SAPs.
Defines the Destination Port for Management SAPs.
fields:
Security
>
System Configuration
Description
Default = Enabled. Disabled will prevent Telnet sessions to the
VBrick encoder.
Default = Enabled. Disabled will prevent FTP sessions to the
VBrick encoder. Note that this feature must be enabled to upgrade
the encoder firmware using VBDownload.
• Enabled – Default. Lets you manage the encoder from a web
browser using the VBAdmin management application.
Supports HTTP or HTTPS.
• Disabled – Prevents you from managing the encoder using
VBAdmin.
• HTTPS Only – Encrypts and secures the VBAdmin pages
using HTTPS.
Default = Enabled. Disabled will prevent you from using an
external MIB browser to view or write parameters.
Advanced Configurations
> .
Security
© 2015 VBrick Systems, Inc.