VBrick 9000 Admin Manual page 153

Field
DHCP Status
COM1/2 Passthrough
Operational State
MAC Address
Network Port Status
Network Port Speed
Network Port Mode
VBrick 9000 Encoder Admin Guide
Description
Shows DHCP status from System Configuration > Network page.
The current operational state of the COM ports. Only COM1 can
be used as a management port. The possible values are:
• Disabled
• Active
• Internal Error (may indicate a KLV configuration mismatch)
• Rejected
• No Dedicated IP Addr
Displays the encoder's Media Access Control (MAC) address.
Status of the Ethernet network interface.
Speed of transmission for the Ethernet network interface.
The mode of transmission for the Ethernet network interface.
Monitor
145