Manage Configuration; Reset System Configuration - VBrick 9000 Admin Manual

Table 1. User Name and Password Field Attributes
User Name
Password
Confirm
Table 2. Default User Names, Passwords, and Access Level
User Level
Administrator admin
Operator
Diagnostics
Public
Front Panel

Manage Configuration

This
Manage Configuration
configuration. It also lets you read and save the current configuration to an .xml file and
restore that configuration if necessary.

Reset System Configuration

To access the

1. Navigate to
section.
This menu lets you default some or all encoder configuration parameters.
24
Enter desired user name. Cannot be blank or exceed 20 characters. It
may include any combination of alphanumeric characters and only the
following special characters:
Table 2 below for defaults.
Enter password. Cannot be blank or exceed 20 characters. May include
any combination of alphanumeric characters but only the following
special characters:
below for defaults.
Confirm new password entry. The encoder will then display a user
message and reboot.
Default User Name Default Password Access Level
admin
operator operator
diagnostics diagnostics
public public
NA NA
page lets you reset some or all of the parameters in the encoder
Reset System Configuration
>
System Configuration Manage Configuration
~ ! # $ ^ * + & [ ] { } | - < >
~ ! # $ ^ * + & [ ] { } | - < >
Read, diagnostics, edit,
passwords.
Read, diagnostics, edit.
Read, diagnostics.
Read
Front panel encoders only.
Allows direct access to keypad
functions on encoder front panel
if set.
fields:
>
Reset System Configuration
See
See Table 2
© 2015 VBrick Systems, Inc.