VBrick 9000 Admin Manual page 105

connections will receive a stream appropriate for their connectivity. With Smooth Streaming
the video/audio is encoded into short segments that are hosted on an IIS HTTP web server.
VBrick Smooth Streaming supports up to three Video Rates and one Audio Rate. VBrick
Smooth Streaming does not support serving, archiving, closed captions, or multicast.
Table 1. Smooth Streaming Requirements
Field
IIS Web Server
Streams Supported
Transmitters Supported 1–25 transmitters (no serving, archiving, closed captions, or
IDR Frame Interval
Field
Smooth Streaming Dest Pub
Point Name
Smooth Streaming Username
IIS Username
Smooth Streaming Username
IIS Password
Smooth Streaming Domain
VBrick 9000 Encoder Admin Guide
Description
Microsoft IIS (6.0 or higher) or compatible web server.
4 supported streams.
multicast).
IDR Frame Interval must be 1 or 2 seconds (not zero). All Video
Rates included in the stream must have the same Target Frame
Rate and IDR (configured on the Encoder Configuration > Video
page).
Description
Destination publishing point on IIS server. Use any
combination of up to 254 alphanumeric and special
characters (no spaces).
Only used when IIS requires authentication. Use any
combination of up to 20 alphanumeric and special
characters (no spaces).
Only used when IIS requires authentication. Use any
combination of up to 20 alphanumeric and special
characters (no spaces).
Use for authentication through a different domain
controller. For example If the server is on a domain but a
local name will be used for authentication, enter the server
name. Use any combination of up to 255 alphanumeric and
special characters (no spaces).
Encoder Configuration
97