Home Page Leds - VBrick 9000 Admin Manual

Field
Application Code Revision Read from the Monitor > Monitor the System page.
System Serial Number
Current Operational Mode Indicates the current operational mode of the VBrick. The

Home Page LEDs

The colored LEDs in the bottom middle of the
health and status of the encoder. These indicators are dynamically refreshed every five
seconds and give you an up-to-the-minute snapshot of the current status. Video input and
streaming LEDs are not shown when managing a decoder-only appliance.
LED
Video Input †
Streaming †
Alarms
Configuration
† Not shown on decoder-only models.
4
Description
Read from the Monitor > Monitor the System page.
following modes are supported. See the troubleshooting topic
on Operational Modes for more information.
• – Normal operation.
Run
• – User selected mode for running certain
Diagnostics
VBrick diagnostics.
• – Automatically launched (not selectable)
Maintenance
when the software does not load.
• – Limited operational mode (not selectable).
Limited Run
Normally occurs if a hardware problem exists within the
VBrick but it can still partially operate.
• – Limited operational mode (not selectable).
Overloaded
This mode occurs when the VBrick is configured to handle
more video than its operational capacity. If this occurs, the
VBrick needs to be reconfigured to reduce the number of
streams and/or data rates. Under this condition, the
encoder temporarily reduces video traffic in order to
maintain VBAdmin functionality.
Status
• Green – Running.
• Red – Video Input problem (with any enabled stream).
• Green – at least one transmitter or server client is streaming.
• Yellow – no transmitters or server clients are streaming.
• Green – no alarms are present.
• Red – one or more alarms are present.
• Green – no configuration errors are present.
• Yellow – one or more configuration errors are present.
page give you a quick snapshot of the
Home
© 2015 VBrick Systems, Inc.