VBrick 9000 Admin Manual page 109

Field
Click Here to Play Stream
Choose Server to Configure Select from dropdown list. The number of servers is
Enable Server
Server Name
Stream Select
Transport Type (read-only)
Resource Name
Stream URL (read-only)
RTCP Transmit
RTCP Transmit Interval
Servers Page Topics:

Servers Announce Settings
Servers External Announce Settings
VBrick 9000 Encoder Admin Guide
Description
Edit Mode/Read-only. Shown in Edit mode only if the server
is enabled and RTP selected for Transport Type. Click once
to launch the stream in the QuickTime plugin (using the SDP
file). This link will work only with QuickTime 7.0 or higher. If
QuickTime is not installed, you will be prompted to
download the application from Apple.
configured on the Encoder Configuration > Global page.
Check to enable the server. Default = enabled. The server
must be enabled for streaming to occur
Enter a user-friendly name for the selected server.
Select a configured stream from the dropdown.
• RTP – Default. Realtime transport protocol provides end-
to-end network transport functions suitable for video.
• Transport Stream – Multiplexes the digital video and
audio into one bit stream.
Defines the server URL. Default =
the server number.
Use this URL in the decoder to view the stream via RTSP.
RTP only. Enable allows RTCP sender reports to be sent
from the VBrick encoder. Default = Enable.
RTP only. If RTCP Transmit is enabled, this setting tells the
encoder how often (in seconds) to send the reports. Default
= 10 seconds.
Encoder Configuration
where is
vbStream1SX X
101